Precise Flow · Calibration · Test Equipment
German

S320 Controller – digital modules and accessories

The S320 Controller can be extended by slot card type 400 for more digital inputs and digital outputs. For this purpose there are a number of digital input and output modules as 19" rear side and hat rail modules.

 

The connection between slot card and modules is provided by a shielded, preferably twisted two-wire cable. The total length of the bus segment can be up to 1000 meters depending on the type of cable. Data transfer is provided on the hardware side by RS485 interfaces. Micro controllers in the modules and on the bus card execute the software protocol easily understandable by the user.

 

Appropriate accessories make work easier! The selection ranges from power packs for quick commissioning to cables, plugs and diagnosis adapters. Connection adapters are also available for wiring of a RS485 field bus.


S320 extension modules and accessories:

  • S320 – MOD 412 extension 16xDE 19" technology
  • S320 – MOD 414 extension 8xDE hat rail
  • S320 – MOD 422 extension 16xDA 19" technology
  • S320 – MOD 424 extension 8xDA hat rail
  • S320 – MOD 432 extension 8xDE+8xDA
    19" technology
  • S320 - accessories

More information about S320 extension modules and accessories:

 

Article

IID

Description

MOD412 - Extension module MOD412
16 x DE module with 16 digital inputs for 19" slide-in technology. Connection to slot card TYP400. Width 7 TE, height 3HE. Supply 24 Volt. State indicator by light emitting diodes
MOD414 - Extension module MOD414
8 x DE module with 8 digital inputs for hat rail assembly. Connection to slot card TYP400. Overall width 35 mm. Supply 24 Volt. State indicator by light emitting diodes
MOD422 - Extension module MOD422
16 x DA module with 16 digital outputs 500mA each (4 Ampere max. per module) for 19" slide-in technology. Connection to slot card TYP400. Width 7 TE, height 3HE. Supply 24 Volt. State indicator by light emitting diodes
MOD424 - Extension module MOD424
8 x DA module with 8 digital outputs 500mA each (4 Ampere max. per module) for hat rail assembly. Connection to slot card TYP400. Overall width 35 mm. Supply 24 Volt. State indicator by light emitting diodes
MOD432 - Extension module MOD432
8 x DE + 8 x DA module with 8 digital inputs and outputs 500mA each (4 Ampere max. per module) for 19" slide-in technology. Connection to slot card TYP400. Width 7 TE, height 3HE. Supply 24 Volt. State indicator by light emitting diodes
LEDIG - Diagnosis adapter
The diagnosis adapter is plugged on the digital connections of the basic unit and indicates the states of the digital signals by light emitting diodes. The digital inputs can be activated by a 8-pole DIL-switch (OR operation)
T485 - Bus adapter T485
Bus adapter for easy connection of RS485 field bus wiring by screw terminals. Assembly on hat rail, termination by DIL switch. Incl. 2 meters FCC68 4-pole cable for connection to the RS485 interfaces of S320 Controller
DIF - Sealing frame
Sealing frame for front plate cutout
LINK2 1x LINK2 cable for link connection, 2 meters
Cable for link interface 2 meters long. One side FCC68 6-pole, other side DSUB socket 9-pole
LINK7 - LINK7 cable for link connection, 7 meters
Cable for link interface 7 meters long. One side FCC68 6-pole, other side DSUB socket 9-pole
DSA25/9 - Link adapter
Link adapter for 25-pole serial PC connections. One side DSUB pin 9-pole, other side DSUB socket 25-pole
DSK9/2 - Connection cable serial 9-pole, 2 meters long
One side DSUB socket 9-pole, other side DSUB pin 9-pole. Connection 1:1. Connection between PC and S320 Controller (Ser0) establishes the required zero modem connection
DSK9/7 - Connection cable serial 9-pole, 7 meters long
One side DSUB socket 9-pole, other side DSUB pin 9-pole. Connection 1:1. Connection between PC and S320 Controller (Ser0) establishes the required zero modem connection
ST8 2x Connector 8-pole
8-pole connector, e. g. for digital inputs and outputs
ST4 - Connector 4-pole
4-pole connector, e. g. for analog inputs
ST3 - Connector 3-pole
3-pole connector, e. g. for analog outputs
SS3 1x Connector 3-pole for supply socket
3-pole connector especially for the SUPPLY connection
KLK 2x Fixing clamp short
Fixing clamp short, set of two pieces
KLL - Fixing clamp long
Fixing clamp long, set of two pieces
NAD01 - Table power supply 24 Volt 30 Watt
Input 90-260VAC. For supply of S320 Controller e. g. during commissioning. Supply plug. Complete with power cord 2 meters
NAD02 - Hat rail power supply 24V 30 Watt
Device for control cabinet assembly on hat rail. Input 90-260VAC. For permanent supply of S320 Controller in the control cabinet
COD - Coding pins, stripe with 10 pieces
Coding pins for coding of connectors ST3, ST4 and ST8

IID: Included in the scope of supply of the basic unit.

To top

S320 Controller extension modules

From measuring unit
to control unit!

More information and technical details can be
found in the data sheet