Precise Flow · Calibration · Test Equipment
German

Laminar Flow Elements 50MC02-FE/FET for high flow rates

The Laminar Flow Elements of the series 50MC02-FE resp. 50MC02-FET with inlet filter for high flow rates were offered in 4 sizes from 2800 l/min up to 63700 l/min. Often it happens that a LFE as a reference unit has to be connected inline and not much space is avalable there.

 

For such applications we offer an additional filter housing for the LFE base version with inlet filter. This filter housing can be mounted and fixed to the filter plate and changes the filter LFE into an inline version which can also be connected on the inlet side. The used conversion kit can also be installed anytime later.


Model LFE-50MC02-FE

 

LFE with exchangeable inlet filter

  • Aluminium body with built-in stainless steel matrix
  • Differential pressure connection: G1/4"
  • Process connection: DN50 up to DN200, optionally with DIN flange
  • Nominal flow rate: 2800 - 64000 l/min air at 20 mbar DP
  • Operation conditions: 0 to 50°C, 0.6 to 1.4 bar abs., humidity not condensing

Model LFE-50MC02-FET

 

LFE with exchangeable inlet filter and filter housing

  • Aluminium body with built-in stainless steel matrix
  • Differential pressure connection: G1/4"
  • Process connection: DN50 up to DN200, optionally with DIN flange
  • Nominal flow rate: 2800 - 64000 l/min air at 20 mbar DP
  • Filter housing made of stainless steel
  • Operation conditions: 0 to 50°C, 0.8 to 1.4 bar abs.

By using the PDP sensor very compact test section designs can be implemented.
Our delivery program includes various terminal blocks and inlet/outlet tubes for the setup of complete measuring sections as an accessory.

Laminar Flow Elements series 50M

Universal measuring elements with wide measuring ranges

More information and technical details can be
found in the data sheet



Additional information
on this subject:

 

Flow calibration

Flow element software

To our contact page